6
/
18
Bind TBS NanoRX:
1.
For Taranis X9D/X9D Plus/X9E and Taranis QX7, turn on the transmitter, go to the TOOLS
–
CROSSFIRE SETUP
–
XF Micro TX, and select Bind.
2.
Turn on the receiver while holding the bind button on the receiver, release the button
and see if the green light on and flashing. Then hold the button for about 8 second, and
release. The green light will turn off and the red light will start flashing, update micro RX
？’
will appear on the transmitter screen. S
elect ‘ENTER’.
3.
Wait for the update to complete. The green light will be on, indicating that the binding
was successful.
1
2
3
4
5
6
Bind Button
Binding
Binding Successful
