85
9.4 Human Body Detection
Human body detection alarms occur when the presence of human
beings is detected in the specified area. Note that this function is only
applicable to the IP cameras that are equipped with Human Body
Detection function. See
1. Click
Alarm > Human Body Detection
.
2. Enable human body detection by selecting the
Enable
check box.
3. Click
, and then draw detection area.
NOTE!
Only one detection area is allowed for each camera.
4. Set detection sensitivity. The higher the sensitivity, the more likely
a human body will be detected.
5.
Click
right to
Trigger Actions
and set action(s) to trigger. For
6. (Optional) Click
right to
Arming Schedule
and then set the
time when actions will be triggered.
7. Click
Apply
to save the settings.
