GeoVision GV-SNVR3203 User Manual Download Page 152

Page: 152 / 170

142

14.5 System Restoration

Use this function to restore some or all factory default settings. The

NVR will restart automatically to complete this operation. Recordings

and operation logs will not be deleted.

1. Click

Maintenance > Restore

2. Click

Default

to restore factory default settings except network

and user settings, or click

Factory Default

to restore all factory

default settings.

14.6 Automatic Maintenance

Set the NVR to restart as scheduled and delete files (including

recordings and snapshots) as needed. Only admin can perform this

operation.

1. Click

Maintenance > Auto-Function

2. Set an auto-restart time, and choose a way to delete files

automatically.

CAUTION!

Files deleted automatically cannot be recovered.

Summary of Contents for GV-SNVR3203











































































































































































Search results

Summary of Contents for GV-SNVR3203

Reviews:

Related manuals for GV-SNVR3203

Brands by name

Popular brands

GeoVision GV-SNVR3203, User Manual

Search results

Summary of Contents for GV-SNVR3203

Reviews:

Related manuals for GV-SNVR3203

Brands by name

Popular brands