127
13.2 Time Configuration
13.2.1 Time
1. Click
System > Time > Time
.
2. Select the correct time zone, and then set date and time formats
and the system time. The following shows an example.
3. To use Network Time Protocol (NTP), enable auto update, set the
address and port number of the NTP server, and the update
interval.
4. Click
Apply
to save the settings.
13.2.2 DST
1. Click
System > Time > DST
.
2. Enable DST by selecting the check box, and then set the start
time, end time, and DST bias correctly.
3. Click
Apply
to save the settings.
