GeoVision GV-SNVR3203 User Manual Download Page 128

Page: 128 / 170

118

Disk Configuration

12.1 Disk Management

View disk information, including total and free disk space, disk status,

disk type, disk usage, and disk property. Admin users can format

disks and edit disk property

1. Click

Storage > Hard Disk

2. To add a disk, click

Add

. In the dialog box displayed, select disk

usage (recording/snapshot or backup) and disk type (currently

NAS only), enter the server address and directory, and then click

Add

. Up to eight NAS disks are allowed.

3. To edit disk property, click

, and then modify disk usage

(recording/snapshot or backup) and disk property (

Read/Write,

Read Only

Redundant

) as needed.

Summary of Contents for GV-SNVR3203











































































































































































Search results

Summary of Contents for GV-SNVR3203

Reviews:

Related manuals for GV-SNVR3203

Brands by name

Popular brands

GeoVision GV-SNVR3203, User Manual

Search results

Summary of Contents for GV-SNVR3203

Reviews:

Related manuals for GV-SNVR3203

Brands by name

Popular brands