Getting Started
5
2
2.1.2 Configuring the IP Address
Follow the steps below to configure the IP address.
1. Open your web browser, and type the default IP address
2. In both Login and Password fields, type the default value
admin
.
Click
Apply
.
3.
In the left menu, select
Network
and then
LAN
to begin the
network settings. This page appears.
Figure 2-4
4. Select
Dynamic IP address
,
Static IP address
or
PPPoE
and
type the required network information.
5. Click
Apply
. The camera is now accessible by entering the
assigned IP address on the web browser.
Summary of Contents for GV-PTZ010D
