4.1.5.7.4 Security - Switch - SNMP - User
Configure SNMPv3 user table on this page. The entry index keys are Engine ID and User Name.
Delete
Check to delete the entry. It will be deleted during the next save.
Engine ID
An octet string identifying the engine ID that this entry should belong to. The string must contain an
e
er.
even number(in hexadecimal format) with number of digits between 10 and 64, but all-zeros and
all-'F's are not allowed. The SNMPv3 architecture uses the User-based Security Model (USM) for
message security and the View-based Access Control Model (VACM) for access control. For the
USM entry, the usmUserEngineID and usmUserName are the entry's keys. In a simple agent,
usmUserEngineID is always that agent's own snmpEngineID value. The value can also take th
value of the snmpEngineID of a remote SNMP engine with which this user can communicate. In
other words, if user engine ID equal system engine ID then it is local user; otherwise it's remote us
User Name
A string identifying the user name that this entry should belong to. The allowed string length is 1 to
32, and the allowed content is ASCII characters from 33 to 126.
Security Level
Indicates the security model that this entry should belong to. Possible security models are:
entry already exists. That means it must first be
NoAuth, NoPriv:
No authentication and no privacy.
Auth, NoPriv:
Authentication and no privacy.
Auth, Priv:
Authentication and privacy.
The value of security level cannot be modified if
ensured that the value is set correctly.
60
Summary of Contents for GV-POE0812
Page 268: ...260...
