GeoVision GV-POE0812 User Manual Download Page 246

Page: 246 / 360

4.2.4.4 DHCP - Detailed Statistics

This page provides statistics for DHCP snooping. Notice that the normal forward

HCP packet is done by L3

ar the statistics on specific port may not take

ffect on global statistics since it gathers the different layer overview.

eceive and Transmit Packets

per-port TX statistics isn't increased if the incoming D
forwarding mechanism. And cle
e

x and Tx Discover

he number of discover (option 53 with value 1) packets received and

ansmitted.

Rx and Tx Offer

he number of offer (option 53 with value 2) packets received and transmitted.

Rx and Tx Request

he number of request (option 53 with value 3) packets received and transmitted.

Rx and Tx Decline

he number of decline (option 53 with value 4) packets received and transmitted.

Rx and Tx ACK

he number of ACK (option 53 with value 5) packets received and transmitted.

x and Tx NAK

he number of NAK (option 53 with value 6) packets received and transmitted.

Rx and Tx Release

he number of release (option 53 with value 7) packets received and transmitted.

Rx and Tx Inform

he number of inform (option 53 with value 8) packets received and transmitted.

Rx and Tx Lease Query

he number of lease query (option 53 with value 10) packets received and

ansmitted.

T
tr

238

Summary of Contents for GV-POE0812









































































































































































































































































































































































Search results

Summary of Contents for GV-POE0812

Reviews:

Brands by name

Popular brands

GeoVision GV-POE0812, User Manual

Search results

Summary of Contents for GV-POE0812

Reviews:

Brands by name

Popular brands