GeoVision GV-POE0812 User Manual Download Page 207

Page: 207 / 360

Web Management

4.1.19.7 QoS - DSCP-Based QoS

This page allows you to configure the basic QoS DSCP based QoS Ingress

lassification settings for all switches.

DSCP

aximum number of supported DSCP values are 64.

Trust

ontrols whether a specific DSCP value is trusted. Only frames with trusted
SCP values are mapped to a specific QoS class and Drop Precedence Level.

rames with untrusted DSCP values are treated as a non-IP frame.

C
D
F

QoS Class

oS class value can be any of (0-7)

rop Precedence Level (0-3)

Buttons

Save:

Click to save changes.

Reset:

Click to undo any changes made locally and revert to previously

saved values.




199

Summary of Contents for GV-POE0812









































































































































































































































































































































































Search results

Summary of Contents for GV-POE0812

Reviews:

Brands by name

Popular brands

GeoVision GV-POE0812, User Manual

Search results

Summary of Contents for GV-POE0812

Reviews:

Brands by name

Popular brands