Creating GV-IP Camera’s Login
Credentials
The default Administrator and Guest accounts are no longer supported by
firmware V1.14 or later. When purchasing a new camera or performing
factory resetting, you need to set up a login username and password for
the camera.
1.
Download and install
GV-IP Device Utility
from the company
2.
On the GV-IP Device Utility window, click
to search for your GV-
IP camera.
3.
Double-click your GV-IP camera in the GV-IP Device Utility list. This
dialog box appears.
4. Click
the
Change Username
and
Password
tab to type a new
username and password. Note that the new password must meet
the password strength requirements.
5. Optionally
click
Upgrade all devices
to use the same username
and password on all other devices.
vi