Restoring to Factory Default
17
7
7. Restoring to Factory Default
If for any reason the camera is not responding correctly, you can restore the camera back
to its factory default settings using the Web interface or the Default Button.
7.1 Using the Web Interface
To restore to default settings using the Web interface:
1. Select
System
at the top >
Factory Default
. This page appears.
2. Select
Full Restore
,
Partial Restore
, or
Reboot
.
Note:
See details in
2.2.14 Factory Default, GV-IP Speed Dome User’s Manual
.
7.2 Directly on the Camera
1. Press and hold the
Default Button
for about 20 seconds. For GV-QSD5730, see
1.2 Overview
of GV-QSD5730
; for GV-QSD5731-IR, see
1.3 Overview of GV-QSD5731-IR.
2. When the camera rotates twice, the process of loading default is completed and the camera
reboots automatically.