Accessing Live View
45
3
3.3 Fisheye Dewarping
You can enable fisheye dewarping if the fisheye camera is in Single View or
Grid 1
of the
Quad View. Right-click the live view of the fisheye camera and select
Fisheye
to enable
fisheye dewarping.
Note:
Fisheye dewarping is only supported by GV-IP Decoder Box Plus.
Figure 3-3
The following fisheye settings are available:
Image Alignment:
Align the red circle with the inner edge of the camera image if
needed. You can adjust the red circle by dragging and by scrolling the mouse.
Camera Modes:
Fisheye: Quad view:
Composed of 3 PTZ views and a circular source image.
Fisheye: 360 degree:
Composed of two PTZ views and one 360º panoramic
view.
Fisheye: Dual 180 degree:
Composed of two 180º views.
Fisheye: Single view:
Composed of one PTZ view.
Mount Ceiling
/
Mount Wall
/
Mount Ground:
Select according to where the camera is
mounted.