Overview
5
2
2.2
Baud Rate Setup
To have the POS data transferred to the GV-System via the GV-Data Capture, you need to
set the exact baud rate in each connected device, including the GV-Data Capture and
POS systems.
On the side panel of the GV-Data Capture, there is a Baud Rate Switch. Each number
(from 0 to 7) on the Switch represents a kind of baud rate. Set the baud rate to correspond
to that of the POS system.
Switch Number
Baud Rate
0
115200
(default value)
1 57600
2 38400
3 19200
4 9600
5 4800
6 2400
7 1200
