4
1.4 Connecting to PC
There are two ways to power and connect GV-Cloud Bridge to the PC. Only one of the two
methods can be used at a time.
1.
GV-PA191 PoE Adapter (optional purchase required):
Through the LAN port (No. 7,
1.3 Overview
), connect to a GV-PA191 PoE Adapter, and connect to the PC.
2.
Power Adapter:
Through the DC 12V port (No. 3,
1.3 Overview
), use the supplied
terminal block to connect to a power adapter. Connect to your PC through the LAN port
(No. 7,
1.3 Overview
).
1.5
Accessing GV-Cloud Bridge
When GV-Cloud Bridge is connected to a network with DHCP server, it will be automatically
assigned with a dynamic IP address. Follow the steps below to access your GV-Cloud Bridge.
1. Download and install the
2. Find your GV-Cloud Bridge on GV-IP Device Utility window, click its IP address, and
select
Web Page
. This page appears.
3. Type the necessary information and click
Create
.
Note:
1. The PC used to access the Web interface must be under the same LAN as the GV-Cloud
Bridge.
2. If the network connected doesn’t have DHCP server or is disabled, GV-Cloud Bridge can
be accessed by its default IP address 192.168.0.10, see
1.5.1 Assigning a Static IP
Address
.