Installing on a Network
3
2
Chapter 2 Installing on a Network
Through network connection, you can access the Web interface of the controller and
connect it to GV-ASManager for more comprehensive management. There are three ways
to set up the controller on network.
1. By default, when the controller is connected to a network with a DHCP server, a
dynamic IP address will be assigned to the controller. See
2.1 Checking the Dynamic IP
Address
to look up its IP address.
2. When the DHCP server on your network is unavailable or disabled, the controller is
accessible by its default IP address
192.168.0.100
. See
2.2 Configuring the Static IP
Address
.
3. You may also use a DDNS (Dynamic Domain Name System) server to access the
controller. For details on domain name service, see
2.3 Configuring DDNS Connection
.