GeoVision GV-AS Series, Installation Manual, Page: 153 / 172

GV-ASManager Quick Start Guide
143
5
5.2.2 Installing the GV-ASManager
Starting from version 2.0.1, the GV-ASManager software that comes with GV-AS Controller
can manage one controller. If you need to manage more than one controller, it is necessary
to use the USB dongle with the GV-ASManager software. The available types of dongles for
purchase are as follows:
•
Dongle 4 is used for connection of up to 4 GV-AS Controllers.
•
Dongle 10 is used for connection of up to 10 GV-AS Controllers.
•
Dongle 30 is used for connection of up to 30 GV-AS Controllers.
•
Dongle 50 is used for connection of up to 50 GV-AS Controllers.
•
Dongle 255 is used for connection of up to 255 GV-AS Controllers.
To install the USB Dongle drivers:
1. Insert the USB Dongle to your computer.
2. Insert Software CD to your computer and a window will pop up automatically. Select
Install or Remove GeoVision GV-Series Driver and click Install Geovision USB
Devices Driver .
To install the GV-ASManager:
To run GV-ASManager V2.0 or later , you must first install DirectX End-User Runtimes
(November 2008) and .NET Framework. Follow these steps to install the programs.
1. Insert Software CD to your computer and a window will pop up automatically.
2. If you don’t have DirectX 9.0c installed in your computer, select Install DirectX 9.0c .
3. Select Install DirectX End-User Runtimes (November 2008) .
4. Select Install Microsoft .NET Framework Version 3.5 .
5. Select Install GeoVision V2.3.0.0 Access Control System , click GeoVision Access
Control System and follow on-screen instructions to complete the installation.
Note: If you are upgrading from a previous version to GV-ASManager V2.3 but want to
keep your current database, refer to Note for the User of Upgrading GV-ASManager in GV-
ASManager User’s Manual for detailed instructions.