BIOGAS 5000 gas analyser
OMBIO5KN4.1
Copyright Geotech
Page
33
7.3.2 Units of measurement
This option enables the operator to specify the default units of
measurement for the instrument.
1)
Select ‘Key 2 – Units of Measurement’ and the following screen is displayed:
Units of measurement menu
2)
To set the required units of measurement toggle and choose from the following:
Key 1
Temperature
O
C
O
F
Key 2
Flow
scfm
m3/hr
Key 3 Measurement
Inches
Millimetres
Key 4
Pressure
mb
“H2O
Key 5
Balance
Balance
Residual
3)
Select soft-key ‘Exit’ to exit this screen and return to the ‘User Settings’ menu.
7.3.3 ID selection
The ID selection screen allows the operator to scroll through all IDs, including those uploaded
from GAM and added directly onto the instrument, and then make a selection. Detailed
information regarding the currently selected ID, such as flow device type and pump runtime,
are displayed below:-
