OMBIO5KN4.1
BIOGAS 5000 gas analyser
Page
30
Copyright Geotech
7.2.3
Device information
This option displays default instrument information and settings such as
serial number, service due date, last zero calibration date and last span
calibration date.
1)
Select the ‘Menu’ key on the front of the analyser to display the ‘Device Settings’
menu.
2)
Select ‘Key 3 – Device Information’ and the following screen is displayed:
Device information
3)
The information displayed on this screen is informational only and cannot be
edited by the operator. The operator may be asked serial number, service due
date and version number information when contacting Geotech.
Note: The comms setting ‘Legacy’ mode is for use with GAM >=v1.5. GA5K
mode is reserved for future applications – use with 5000 series
updater tool
4)
Select soft-key ‘Exit’ to exit the screen and return to the ‘Device Settings’ menu.
7.2.4
Diagnostics
This option enables the Geotech Technical Support Team to identify and resolve
issues with the instrument and settings. If required, the operator may be
asked to confirm the diagnostics displayed.
1)
Select the ‘Menu’ key on the front of the analyser to display the ‘Device Settings’
menu.
