Geotech BIOGAS 5000, Operating Manual

Page: 27 / 112

BIOGAS 5000 gas analyser
OMBIO5KN4.1
 Copyright Geotech Page
27
 Now set your analyser back to “legacy mode”. (menu key > device settings > 3
Device information > press “Comms mode” soft key.) Your analyser will not work
with GAMS unless it is in “legacy mode”
6.13.7 Update from file
If the update from “Check Internet” option does not work you can try the following steps.
Each company may have certain IT policies in place that stop the download of certain files
which may stop the successful download of the update file. You may need help from you
I.T. department to download this.
 Click here to download the update file
( http://www.geotechuk.com/G5000Files/G5000_UPDATE_FILE.5kc )
 When prompted select the save as function, and save the file to a location you can
access later. Do not select open
 This may take several minutes depending on your internet speed
 Follow the instructions as per section 6.13.6 - Updating the analyser
 However, chose “Select file” instead of “Check internet”
 Navigate to where you saved the file (G5000_UPDATE_FILE.5kc)
 Click open to select the file
 The rest of the process is the same as 6.13.6 - Updating the analyser