manualshive.com logo in svg

Geotab GO6, Product Manual

Share
Download
Geotab GO6 Product Manual Download Page 83

●

Iridium

○

Satellite system allowing coverage anywhere in the world

○

Works with GSM/3G/WIFI/CDMA when it has coverage but allows pinging, stop 
detect and panic when out of cell coverage

○

Additional hardware and a monthly charge required

●

WIFI

○

Devices that can use a wifi network or hotspot to enable live tracking or 
uploading when connecting at the office

●

RF local download

○

900 Mhz radio is used to upload data for vehicles when they return back to the 
office in range of a special downloader that plugs into the network. The range is 
around 1000ft

●

Accident reconstruction

○

The device records in second by second resolution the last 100 seconds of 
position and speed data for detailed analysis of what happened in an accident

○

The force being applied to the vehicle in any direction is recorded. This allows 
forensic look at when brakes were applied, where and when an impact occurred 
and from what direction. Also when the device detects that a possible accident 
has occurred, it automatically sends this detail to the server for analysis.

●

Backup detect

○

Sophisticated software can usually detect when the vehicle is being backed up 
or reversed and when it is moving forward. This is communicated to Checkmate

●

Driver rating

○

The accelerometer is automatically calibrated to figure out the difference 
between hard braking, aggressive acceleration and dangerous cornering or lane 
changes. This is communicated to Checkmate

●

Hours of Service

○

These devices can have an Hours of Service screen added. This enables US 
FMCSA 395.15 property carrying interstate compliance with 

HOS regulations

 

(

http://www.fmcsa.dot.gov/rules-regulations/administration/fmcsr/fmcsrruletext.aspx?

reg=395.15

) 

●

DVIR

○

US Department of Transportation regulations see 

http://www.fmcsa.dot.gov/

rules-regulations/administration/fmcsr/fmcsrruletext.aspx?reg=396.11

 

●

IFTA miles

○

The product supports these requirements. See this 

link

 

http://en.wikipedia.org/

wiki/International_Fuel_Tax_Agreement

. 

Firmware release notes for GO Devices

Device Release Notes for Q3 2012

 (

http://goo.gl/xN4GQ

) 

RF (passive) devices

83

Summary of Contents for GO6

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands