1
2
4
8
7
6
3
5
1 :
2 :
3 :
4 :
5 :
6 :
7 :
8 :
<10%
10%-35%
35%-65%
65%-85%
85%-100%
LED
indicator
light
LED indica-
tor close
LED indicator
flash
Capacity
OFF
ON
LED Light
Power status:
Press the power button to check remain power.
F. How to test remaining power
Note: Please charge and restart the ONPOWER 710 while it is under lock. Status or in shortcut protection caused by incorrect operation.
3. The LED indicators will all light when full charging.
2. The LED indicators will flicker when charging the ONPOWER 710.
1. Charge by Computer or Adapter : connect the ONPOWER 710 with USB cable.
E. How to charge ONPOWER 710
4. Close the LED Light Long press me button (3s), it means the torch dose.
3. Open the LED Light; Long press the button (3s), it means the torch start.
2. Turn off the ONPOWER 710: Short press the power key, make the LED power indicator close, it means the power close.
1. Turn on the ONPOWER 710: Short press the power key, make the LED power indicator start constantly, it means the power start.
D. How to use the ONPOWER 710
Accessory : 1 USB cable.
Weight: 261g +- 10g.
Dimension: 115*69*27mm.
Output: USB1 5V/1A USB2 5V/2. 1A.
Input: Micro USB 5V/IA.
Capacity: 7800mAh / 28.9Wh.
Battery Type: Li-ion Battery.
C. Specification
- Multiple safety protection system to ensure devices safety protection for overcharge overvoltage overburdens and short circuit.
- Water proof design IPX4 (rain and projections).
- Smart LEDS display of remaining power.
- Built-in LED lighting function.
- Two USB output.
- High capacity of 7800mAh.
B. Features
Cover
LED Light
LED indicators
Micro USB Input
USB2 Output
USB1 Output
Power key
Lanyard hole
A. LED indicators :
User Manual ONPOWER 710
EN
