Geometrics MagArrow, User Manual

Page: 9 / 39

9
4. After making the power connection, plug the white connector into the white lithium battery
connector. This connection is for monitoring the three battery’s voltage. Be careful not to
connect them backwards.
5. Slide the battery into the compartment and carefully tuck the wires in.
Hot Swapping the Battery
A new battery pack can be plugged in while the depleted battery is still connected. This will save time
since shutting down the system is not required. See the instructions below on how to hot swap the
battery.
1. Loosen the screws on the battery cover with the screwdriver and remove the cover.