GeoMax 6017094 User Manual Download Page 20

Page: 20 / 72

Description of the System

2.1

System Components

9832_002

Zoom70/90

Field controller

Component

Description

Zoom70/90 instrument

•

A total station for measuring, calculating and capturing

data.

•

Consisting of various models with a range of accuracy

classes.

•

Combined with the multipurpose field controller to conduct

remote control surveys.

Field controller

A multipurpose field controller enabling the remote control of the

instrument.

The following terms and abbreviations can be found in this manual:

Term

Description

EDM

Electronic Distance Measurement

EDM refers to the laser distancer incorporated into the instru-

ment which enables distance measurement.

Two measuring modes are available:

•

Prism mode. This mode refers to the ability to measure dis-

tances to prisms.

•

Reflectorless mode. This mode refers to the ability to meas-

ure distances without prisms.

accXess

accXess refers to the Reflectorless EDM technology which ena-

bles an increased measuring range with a smaller laser spot size.

Two options are available: A5 and A10.

System components

Main components

Terms and abbreviations

Description of the System

Summary of Contents for 6017094









































































Search results

Summary of Contents for 6017094

Reviews:

Related manuals for 6017094

Brands by name

Popular brands

GeoMax 6017094, User Manual

Search results

Summary of Contents for 6017094

Reviews:

Related manuals for 6017094

Brands by name

Popular brands