Geokon GK-604D, User Manual

Page: 62 / 117

50
3.4.2 Import Menu
The Import Menu is used to import Project Explorer element settings (see
Figure 52) that were previously exported using the Export Menu functions (see
Figure 47).
3.4.2.1 Import Hole Settings
Clicking on this menu item displays the “Select .LVHE File” window (see
Figure 53), from which a hole export file can be selected (see section
3.4.1.2). After selection, a new “Hole” will be created in the currently
selected project. This new “Hole” will contain all the settings and any data
files that were contained in the hole export file. If a hole with the same
name already exists in the currently selected project a message will be
displayed and the hole import will be cancelled.
Figure 52 - Import Menu Figure 53 - Select Hole Export File
3.4.2.2 Import Project Settings
Clicking on this menu item displays the “Select .LVPE File” window (see
Figure 54), from which a project export file can be selected (see section
3.4.1.3). After selection, a new “Project” will be created in the current
workspace. This new project will contain all the settings and any “holes”
that were contained in the project export file. If a project with the same
name already exists in the current workspace a message will be displayed
and the project import will be cancelled.