Geokon GK-604D, User Manual

Page: 42 / 117

30
Figure 28 - Remote Module Connection Problem
After the Remote Module successfully connects to the FPC-1, the blue “POWER
ON” indicator will transition from blinking to steadily lit and the “Live Readings”
screen is displayed (Figure 29).
•
Readings are continuously updated
from the Remote Module. The data set
always starts with ‘Dataset 1’ but can
be switched at any time to ‘Dataset 2’
(usually after rotating the probe 180
degrees).
• At the start of a survey, the ‘Level’ is
set to the “Starting Level” configured
for a particular hole. Pressing either of
the “Record Data” buttons (with a
finger or tap of the stylus) records that
set of A and B values and
automatically changes the ‘Level’ (on
screen) by the amount based on the
hole configuration “Interval” value (see
section 4.1). The “Record Data” option
can also be activated by pressing the
“Enter” key on the lower-right side of
the keypad.
Figure 29 - Live Readings Screen