Geokon GK-604D User Manual Download Page 13

Page: 13 / 117

1. Introduction

The GK-604D is made up of three components:

•

the Readout Unit, consisting of a hand-held field PC running the GK-604D

Inclinometer Readout Application (see Figures 1 and 3).

•

the GK-604D Remote Module, housed in a weather-proof reel enclosure containing

the cable that directly connects to the inclinometer probe (see Figures 1 and 6)

•

The inclinometer probe, either analog or digital. See Figure 1 (digital, 6100D-X) and

Figure 4 (analog, 6100-1X).

Figure 1 – Model GK-604D, Digital Inclinometer System

The Readout Unit and Remote Module components communicate wirelessly using

Bluetooth

, a reliable digital communications solution. This simplifies the handling of the

system in the field as well as simplifying the transfer of data to your PC workstation for

final analysis.

1.1 Features

Rugged, general purpose, reliable readout based on a hand-held PC:

•

all the benefits of a Windows Mobile compatible device (Windows file system,

RS-232, USB and wireless connectivity)

•

long battery life

•

ease of use

Summary of Contents for GK-604D






















































































































Search results

Summary of Contents for GK-604D

Reviews:

Brands by name

Popular brands

Geokon GK-604D, User Manual

Search results

Summary of Contents for GK-604D

Reviews:

Brands by name

Popular brands