Geokon GK-604D, User Manual

Page: 110 / 117

98
1. Connect the 6005-3 probe to the Remote Module and ensure that a Bluetooth
pairing exists between the Remote Module and the FPC-1 Field PC. See Section
2.2 for more information regarding Bluetooth pairing.
2. Launch the GK-604D IRA.
3. Create a new probe in the Probe Library and configure it for a probe type of
“Compass”. Enter “200” for “Zero Shift A” and “.1” for “Gage Factor A”
parameters (see Section 4.2, Probe Configuration). Save the settings.
4. Create a new hole to represent the physical hole, shaft or well that a spiral
survey is to be performed on. Select the compass probe created in item #3 as
the probe to be assigned to this hole. Set the “Azimuth Angle” parameter to “0”
then save settings (see Section 4.2, Hole Configuration).
5. Press the “POWER ON (BLUETOOTH)” button on the reel and ensure that the
blue light is blinking.
6. From the main screen, tap the “Application” menu (Figure 27) then “Live
Readings” (Section 3.3.1) to display the “Live Readings” screen for compass
headings (see Figure 85).
Figure 85 - Live Readings for Spiral Data