Page 19/48
© Geobrugg AG, CH-8590 Romanshorn, Switzerland
GBE-100A-R / 08
7
ANCHORING THE POSTS AND ROPE ANCHORS
Loose ground:
•
Drill holes for anchors
•
Prepare the concrete foundations
111
; the concrete founda-
tions are measured and reinforced in accordance with the
specifications of the project engineer
•
Insert the anchors
05
, spacers
09
, and fastening nuts
10
;
the project engineer calculates the anchor length
•
Optional: Stabilization tube
04
•
Using grout, fix the anchors
05
in place in loose ground
110
•
Fill in the concrete foundation
111
•
Tighten the fastening nuts
10
to a preload force of approx. 30 kN
Concrete:
•
Applicable to all ground and rock types
•
Dig a hole for the concrete foundation
111
The reinforcement of the concrete foundation is measured in
accordance with the specifications of the project engineer
•
Install both anchors
08
(using a template),
spacers 09 and
fastening nuts 10 must be attached on both sides of the
base plate
•
Fill in the concrete foundation
111
•
Tighten the fastening nuts
10
to a preload force of approx. 30 kN
09, 10
09, 10
08
111
110
04, 05
09, 10
111
1.0 m
0.5 m
0.4 m
Summary of Contents for GBE-100A-R
