OPERATION
BLANKETROL II, Model 222S
OPERATION AND TECHNICAL MANUAL
Page 12 of 110
SECTION 1. INTRODUCTION
1-0. GENERAL SAFETY PRECAUTIONS
To provide the patient maximum safety during the use of the BLANKETROL II system, a
thorough knowledge and understanding of the system, and its correct application and operating
use are required. Each person who is responsible for use or direction of use of the system,
such as physicians, nurses, technicians and operators must read and understand this operating
manual and all precautions and warnings prior to use. It is recommended this manual be
reviewed at least semi-annually as a refresher to safe operation and application. For proper
knowledge and understanding, in-service training is available upon request.
1-1. GENERAL DESCRIPTION OF THIS MANUAL
This manual describes the operation, maintenance, and service of the BLANKETROL II system.
Section one describes the physical and functional characteristics of the BLANKETROL II
System. Section two describes how to prepare the BLANKETROL II unit for general use.
Section three describes how to operate the unit in the
MANUAL CONTROL MODE, AUTO
CONTROL MODE,
and
MONITOR ONLY MODE
. Section four describes the regular
maintenance of the BLANKETROL II unit. Section five describes Field Repair and Service of
the BLANKETROL II unit and contains a troubleshooting guide. Section six outlines parts
information and section seven lists the specifications of the BLANKETROL II.
This manual is prepared for professional personnel who use the BLANKETROL II for patient
care as well as technicians and service personnel who are responsible for maintaining the
equipment. All personnel who operate or service the unit should be familiar with all parts of this
manual. However, Sections one, two, and three are primarily intended for personnel who
unpack and setup the unit. Section three is primarily intended for personnel who operate the
unit, and Sections three through six are primarily intended for personnel who service and repair
the unit. Section (1-3.) describes the external features of the BLANKETROL II and Section (3-7.)
describes display messages. These sections should be consulted if questions arise over the
terminology used in this manual.
Operating modes are described in Section (1-5.1.) and are highlighted throughout the manual in
italics and capital letters. Button names and display messages are shown in all capital letters.
Summary of Contents for CSZ Blanketrol II 222S
Page 112: ......
