Genmitsu Jinsoku LC-60A, User Manual

Page: 15 / 65

13
Mechanical Installation
M5 ×10 Screws
Focusing Tool
Holder
Step 5: Installing Laser Module and Self-Stick Non-Slip Pads
1.Fix the laser module to the X-axis module with four M3 × 6 screws.
2. Remove the release paper on all four self-stick non-slip pads and stick those pads to the acrylic legs as illustrated.
3.Insert two M5 × 10 screws into the screw holes of the focusing tool holder, then install the M5 T-nuts, slide the T-nuts
into the groove of the aluminum profile, tighten them firmly to attach the focusing tool holder on the profile.
Self-Stick
Non-Slip Pads
M5 T-nuts
Self-Stick
Non-Slip Pads
Self-Stick
Non-Slip Pads
M3 × 6
Screws
M3 × 6
Screws