Genmitsu Jinsoku LC-60A, User Manual

Page: 11 / 65

09
Mechanical Installation
Step 1: Assembling The Frame
1.Place the Y-axis module (left & right), 2020 aluminum profile (front and back) on a flat surface.
2.Insert the four M5 × 8 screws into the holes on the corner brackets, tighten the screws into the 2020 aluminum profiles
to hold together the profiles and Y-axis modules.
3.Pay attention to the direction of the 2020 aluminum profile, there is a cable tie catch on the left side of the profile facing
the front.
4. Use M5 × 16 screws and M5 × 12 screws to fix the acrylic foot to the machine platform.
M5 ×16
Screws
M5 ×12
Screws
M5 ×12
Screws
M5 ×12
Screws
M5 ×16
Screws
M5 ×16
Screws
M5 × 8
Screws
M5 × 8
Screws
M5 × 8
Screws
M5 × 8
Screws Cable Tie Catch
Y-axis
Module (Right)
Y-axis
Module (left)
M5 ×12
Screws
M5 ×16
Screws
M5 ×8
Screws