5
OPERATION
NOTE:
If cables are connected incorrectly,
generators will not output power.
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the
beginning of this manual including all text under subheadings therein
before set up or use of this product.
(1) Inspect the Parallel Kit and generators for damaged, loose, and missing parts
before set up and starting. If any problems are found, do not use equipment until fixed
properly.
(2) Add fuel and oil to the generators according to the instructions in the generator
manual.
(3) Set up the Parallel Kit either on the ground or clipped to one of the two generators.
(4) Connection cable:
1. Connect the Connectors (red) to the parallel outlets (red) on both generators and
Parallel Kit.
2. Connect the Connectors (black) to the parallel outlets (black) on both generators
and Parallel Kit.
3. Connect the ground connector (ring) to the ground terminal of the generator and
the parallel component, and connect the ground bolt on the parallel component to the
ground screw using a ground cable. Tighten the ground screw.
