12
Tap
Tap lets you change any surface into a trigger pad, triggering notes or samples
while tapping your finger. The Tap function is velocity sensitive.
Tap sensitivity
You can change the sensitivity of the Tap function by dragging the line up or down,
making it longer or shorter. A longer line makes Wave more sensitive and a smaller
one less so.
The tap sensitivity is shared between all Tap functions controlled by the same Wave,
so if you change the sensitivity for one Tap, it will automatically update the sensitivity
of other Taps.
MIDI map Tap: CC/Note
To map Tap to your DAW you need to tie a CC number or a Note to each function.
When mapping, Solo the function you want to map in order for Softwave to only send
the signal for that particular function to your DAW. When the parameter you want to
map has been selected in your DAW tap your finger on a surface in order for the MIDI
message to register.
Tap
Hit any surface to trigger
samples or notes.
