English
-26-
button (
n
) again.
3. Press shutter button to take a picture.
Using the Self-timer & Burst
Use the self-timer to set a delay from the time the shutter button is pressed to the time
the image is shot. Use the burst to record continuous still
image shooting.
1. Turn the power on, and set the camera to the REC
mode.
2. Open the REC menu.
Use
or to select [Drive mode] from the REC
menu.
3. Change the setting.
Press
or to select a drive mode, then press the SET button.
Off:
Record a single image.
2 sec.:
The shutter release will be delay for 2 seconds.
10 sec.:
The shutter release will be delay for 10 seconds.
Double:
Record two images in a shot after pressing the shutter release button 10 to 12
seconds.
Burst:
Keep pressing the shutter button fully to take continuous shooting. Release
the shutter button to stop shooting.
4. Press the shutter button to take a picture.
NOTE
z
When using the self-timer function, be sure to use a tripod or place the digital
camera on a level, stable surface.
Using the Aperture Priority
In this mode, you can set an aperture value to match the
brightness. A higher aperture value brings the background
out of focus. Selecting a lower aperture value allows you to
soft the background.
1. Turn the power on, and set the camera to the Aperture
Priority.