3
•
FLASH mode switch:
To switch to flash mode , the order is as follows:
•
Macro mode switch:
To switch between
Basic
and
Macro
photography.
LCD Description
(1) Function Area
(2) Movie
(3) Flash Mode Indicator
(4) Self-Timer Mode
(5) Image Resolution
(6) Photographing Settings
(7) Battery Life Indicator
(8) TV-OUT Mode
Power On/Off
•
Slide the lens cover down gently. The
Start Screen
appears on the LCD. The power is on after you hear two
beeps.
•
To turn the camera off, slide the lens cover up to turn off the power.
Battery Life Indicator
(1)
Full Battery Power
(2)
Medium Battery Power
(3)
Low Battery Power (No flash available at this status. You need to load new batteries to continue
operation.)
(4)
No Battery Power
Auto Power OFF Function
If no operation is carried out for a fixed amount of time (about 30 sec), the power is turned OFF to prevent
battery wear. This is called Auto Power OFF.
How to Take Pictures
Put your wrist in the wrist strap and hold the camera firmly with both hands. Look at the subject image through the
viewfinder window.
NOTE:
•
The pictures taken will be blurred if the camera is shaken during shooting. Please use a stand or a tripod to
avoid blurring images caused by an unstable camera in shadowy locations.
•
Do not block the
Red-eye Reduction LED
when holding the camera.
Basic Operation
•
Turn on the power of the camera.
•
Press and release the shutter button to take a picture. (At this time, you will hear a beep and the
LED
will flash.
When the flash is over, the camera is ready to take the next photo.)
•
The LCD will display and add up the number of pictures taken.
•
When the internal memory or SmartMedia Card is full, the following message appears on the LCD display and
the camera will beep four times. No photos can be taken after this.
Memory full
Movie recording
1. Turn on the power of the camera.
2. Press
SELECT
button to turn on/off
Movie
photography function. Press
SHUTTER
button to confirm. (Two
beeps can be heard from the camera.)
3. Press
SHUTTER
button to start recording.
4. Press
SHUTTER
button again to stop recording.
5. Recorded images will be saved in the camera with the AVI file format. You can use the USB cable to download
images to a PC.
NOTE:
When you enable the continuous recording function, it will be switched to CIF (320 x 240) automatically.
Basic/Macro Photography
Slide the
Macro
button down on the side of camera to switch to
Macro
mode.
•
Basic mode:
For a normal distance shot (About 60cm ~ Infinity).
•
Macro mode:
For a Macro shot (About 15 ~ 25cm).
Getting Started