Genie Nano-CL C2450, User Manual

Page: 11 / 118

Genie Nano-CL Series™ Nano-CL Series Overview
•
9
Camera Link Frame Grabber Requirement for the Nano-CL
Family
Camera Controls
Trigger Input Using CC1 line
Communication Protocol GenCP over the serial port (GenICam GenCP compliant software)
Camera Link Serial Baud Rate 9600 to 921600
Camera Link Tap Geometry
DECA Mode: 1x10_1Y
On each cycle of the Camera
Link pixel clock, the data for ten
pixels is transmitted via the
Camera Link interface. This is
commonly referred to as a
"ten tap" Camera Link
configuration.
Full Mode: 1x8_1Y
On each cycle of the Camera
Link pixel clock, the data for
eight pixels is transmitted via
the Camera Link interface. This
is commonly referred to as an
"eight tap" Camera Link
configuration.
Camera Link Pixel Clock 85MHz