Page
C-16
OPERATING INSTRUCTIONS
Document 57.0008.5200 - 10/2006
Handler with telescopic boom
GTH-3007
C-3.4
Control lever
Handlers are equipped with an hydraulically driven
servo-controlled lever.
The lever is equipped with a button for locking/releasing
the attachments
and a wheel
to operate the boom
telescope extension.
When shifted to one of the four directions (right/left,
forward/back), it controls the boom lifting/lowering and
the forward/back pitching of the attachment frame.
It is also equipped with an intentional control button
that must be pressed and held in position until the
movement is completed.
If the button is not pressed down, the lever, though
operated, does not perform any function.
DANGER
DANGER
ELECTRICAL
DANGER
PROTECT THE
ENVIRONMENT
ATTENTION
CAUTION
IMPORTANT
DANGER
DANGER
ELECTRICAL
DANGER
PROTECT THE
ENVIRONMENT
ATTENTION
CAUTION
IMPORTANT
Seize the control lever correctly and move it
gently.
The motion speed of the actuators depends on
the lever position: a small motion results in a slow
motion of the actuators; vice versa, a full range
motion of the lever corresponds to the max. speed
of the actuator.
DANGER
DANGER
ELECTRICAL
DANGER
PROTECT THE
ENVIRONMENT
ATTENTION
CAUTION
IMPORTANT
DANGER
DANGER
ELECTRICAL
DANGER
PROTECT THE
ENVIRONMENT
ATTENTION
CAUTION
IMPORTANT
The control lever shall be operated only when
correctly seated in the driving place.
DANGER
DANGER
ELECTRICAL
DANGER
PROTECT THE
ENVIRONMENT
ATTENTION
CAUTION
IMPORTANT
DANGER
DANGER
ELECTRICAL
DANGER
PROTECT THE
ENVIRONMENT
ATTENTION
CAUTION
IMPORTANT
Before operating the control lever, make sure
that nobody is within the working range of the
machine.
Summary of Contents for GTH-3007 Stage B
Page 2: ......