Genie GTH-3007 Stage B, Operator'S Manual, Page: 111 / 134

Page
F-5
OPTIONAL ATTACHMENTS
Document 57.0008.5200 - 10/2006
Handler with telescopic boom
GTH-3007
Technical data
Payload
kg 3000
Width mm 970
Length mm 620
Height mm 600
Weight kg 132
F-1.3 FIXED HOOK ON PLATE
Payload GTH-3007
3000 kg 59.0700.4000
Application
Quick-coupling fitted attachment for lifting loads by
means of special slings.
Safety
Strictly obey the general safety precautions given in
section B “SAFETy”.
Do not oscillate the load.
Do not drag hooked loads.
Lift the load before extending the boom.
Operation
Fork the hook and hold it in position by means of the
locking cylinder.
All loads must be bridled with special textile slings or
chains in compliance with all pertinent regulations.
To handle the load, raise and rotate the telescopic boom
of the handler.
Maintenance
Visually check the hook for damage before using it.
Check the safety catch is in good working order.
DANGER
DANGER
ELECTRICAL
DANGER
PROTECT THE
ENVIRONMENT
ATTENTION
CAUTION
IMPORTANT
DANGER
DANGER
ELECTRICAL
DANGER
PROTECT THE
ENVIRONMENT
ATTENTION
CAUTION
IMPORTANT
Make sure this attachment can be used in the
destination country of the machine. In Italy, this
attachment must be enrolled at ISPESL and
submitted to yearly test.
Application must be submitted directly by the
user.
DANGER
DANGER
ELECTRICAL
DANGER
PROTECT THE
ENVIRONMENT
ATTENTION
CAUTION
IMPORTANT
DANGER
DANGER
ELECTRICAL
DANGER
PROTECT THE
ENVIRONMENT
ATTENTION
CAUTION
IMPORTANT
The fixed hook has been designed to support a
load of 5400 kg. The max payload corresponds to
the nominal capacity rating of the handler on which
it is installed and is indicated on the load charts
supplied with the equipment.