Service and Repair Manual
April 2017
Scissor Components
92
GS-30 • GS-32 • GS-46 • GS-47
Part No. 1272217
81 Remove the fasteners from the entry ladder
and remove the entry ladder from the
machine.
Crushing hazard. The entry
ladder will fall if not properly
supported and secured to the
lifting device.
82 Attach a lifting strap from an overhead crane
to the number 1 outer arm (index #22). Do not
apply any lifting pressure.
83 Remove the external snap rings and retaining
fasteners from the number 1 center pivot pins
(index #11).
84 Remove the number 1 cable bridge from the
machine.
85 Use a soft metal drift to remove the number
1 center pivot pins (index #9).
Bodily injury hazard. The number
1 outer arm may become
unbalanced and fall if not
properly supported when the pin
is removed.
86 Slide the number 1 outer arm (index #22) to
the non-steer end and remove it from the
machine.
Bodily injury hazard. The number
1 outer arm may become
unbalanced and fall if not
properly supported when
removed from the machine.
87 Attach the strap from an overhead crane to the
number 1 inner arm (index #10). Do not lift it.
88 Remove the upper fasteners securing the
number 1 inner arm pivot bracket to the end of
the chassis. Loosen the lower fasteners.
89 Remove the number 1 inner arm (index #10)
from the machine.
Bodily injury hazard. The number
1 inner arm may become
unbalanced and fall if not
properly supported when
removed from the machine.
Component damage hazard. Be
sure not to damage the limit
switch or level sensor
components when the number
1 inner arm is removed from the
machine.
