User Manual
1080p AHD 18x Optical Zoom External 360° PTZ Camera with Wall Bracket
10
2.5 Power Supply and Control Cable Connection
Power Supply Connection
Note: Please check rated voltage and power supply carefully, rated voltage
and current as below:
Control Line Connection
Connect RS485 line to keyboard controller or DVR, if there is more than one that
needs to be controlled by keyboard or DVR, please connect it in parallel.
Note:
1. Protocol and baud rate of keyboard and DVR can be set by customer, just make
sure it is the same with that PTZ.
2. The ID of different camera which is in same system shall be set as different.
3. It should set the difference PTZ Camera Address in Monitor system with multi-
cameras.
2.6 Connection Method
2.7 Cabling Mark Instruction
2.8 Typical Application Wiring Diagram
