Genicom GENUV MG-07.1, Manual, Page: 21 / 24

Genicom Co., Ltd. 2018-rev.1-SA.HAN
5-7) Measuring the light power
5-8) Notify when to replace the battery
※
If there is no data input value for more than 90 seconds, the power is automatically turned off.
5-6) Reset cumulative light intensity(Dose) or maximum light intensity(Max. Power)
Select the function that you want. And push the function button for 3 seconds.
Or turn the power off and on.
90˚
The sensor is located on top of the sensor probe.
The measurement surface of the sensor is positioned
Perpendicular to the UV light source or solar light that
you want to measure.
Page 20
Push the function
button for 3
seconds
If the [batt] message is displayed on the LCD or
if the screen is blurred, replace the battery.