Bosch
genetec.com | Omnicast Video Unit Configuration Guide 4.8 SR3
38
EN.100.007-V4.8.C3.(1)
Configuring the VJT XTCXF transcoder
Up to four cameras can be added to the transcoder for use in Omnicast, this must be done using
the unit’s Web page.
1
Open the unit’s Web page.
2
At the top of the page click
Settings
.
3
From the menu on the left side, select
Transcoder > Transcoder Setup
. Wait for the trans-
coder to scan the network for compatible devices.
4
You can add up to four cameras. Enter the password for each camera if applicable. The
Camera number will represent the camera in Omnicast.
5
Click
Set
.
