Bosch
genetec.com | Omnicast Video Unit Configuration Guide 4.8 SR3
37
EN.100.007-V4.8.C3.(1)
Configuring Bosch units to receive hardware motion detection events
In order to receive hardware motion detection events in Omnicast, certain Bosch PTZ dome
units such as the Autodome 800 HD, must have a VCA profile configured on the unit’s Web page.
1
Open the unit’s Web page.
2
Click
Settings
at the top of the window.
3
Click
Advanced
Mode > Alarm > VCA
.
4
From the
VCA configuration
drop-down menu select a profile.
5
From the
Preset
drop-down menu select a preset.
6
Click
Set
.
7
If your unit was already part of the Omnicast system, restart the Archiver for your changes
to take effect.
