ATEME
genetec.com | Omnicast Video Unit Configuration Guide 4.8 SR3
12
EN.100.007-V4.8.C3.(1)
Configure VSS-441-R4TE units
Before adding ATEME VSS-441-R4TE units in Omnicast, you must configure the video inputs,
enable all video streams, and configure the serial port on the unit’s Web page.
1
Open the unit’s Web page.
2
Click
Video Settings > Physical Input
.
3
On the
Physical Video Input Settings
page, click the
Video 1
input tab.
4
From the
Color System
drop-down list, select
NTSC
.
5
From the
Scan Mode
drop-down list, select
Progressive
.
6
for every video input.
7
Click
Save
.
8
Click
Streaming settings > Video Stream Settings
.
9
On the
Video Streams Settings
page, click the
Video 1
input tab, and then click the
Stream
1
tab.
