AutoVu SharpX mobile installation
tip.genetec.com | AutoVu Hardware Guide for SharpX Mobile Installation
EN.410.018-XS(6) | Last updated: October 6, 2016
49
NOTE:
As indicated on the adapter module, the wheel imaging camera on port 2 will be
associated with the on port 1, and the wheel imaging camera on port 4 will be associated with the
on port 3.
Example
Watch this video to learn more. Click the
Captions
icon (
CC
) to turn on video captions in one of the
available languages.
Aligning a wheel imaging camera
You must align the wheel imaging camera so that the wheel image appears correctly in Patroller.
To align a wheel imaging camera:
1 Position the AutoVu vehicle beside a “target” vehicle so that it is at the expected distance for tire
imaging (between 1.2 - 1.8 meters / 4 - 6 feet).
2 Acquire the live feed from the wheel imaging camera. For more information on using the live feed,
refer to the
Sharp Administrator Guide
.
3 Using the provided Allen wrench, loosen the set screws on the camera housing.
4 There is an “Up” sticker on the camera ball which shows the camera’s vertical orientation. Rotate
the camera ball so that the “Up” sticker is at the top.
5 In the live feed, confirm that the horizon is not tilted in the image.
