About this guide
This guide provides information about installing AutoVu hardware in mobile systems. It includes
topics to guide you through the installation of SharpX cameras as well as all other required hardware
for an AutoVu system.
For a list of all Security Center and AutoVu documentation, go to the GTAP
This guide is written for installers that have experience with automobile mechanics and electronics
as well as electrical wiring.
WARNING
:
Only AutoVu-certified personnel should setup and install AutoVu systems. Read all of
the procedures in this guide before installing an AutoVu fixed or mobile system. Failure to follow the
supplied instructions or information may result in loss of data or damage to hardware and will void
warranty.
Notes and notices
The following notes and notices might appear in this guide:
•
Tip
. Suggests how to apply the information in a topic or step.
•
Note
. Explains a special case, or expands on an important point.
•
Important
. Points out critical information concerning a topic or step.
•
Caution
. Indicates that an action or step can cause loss of data, security problems, or
performance issues.
•
Warning
. Indicates that an action or step can result in physical harm, or cause damage to
hardware.
IMPORTANT
:
Topics appearing in this guide that reference information found on third-party
websites were accurate at the time of publication, however, this information is subject to change
without prior notice to Genetec
™
.
