Section 7 IFR Procedures
7-4
IDU-450 EFIS Software Version 8.0H (Rotorcraft)
1
st
Ed Nov 2018
d) The first waypoint.
2)
VNAV
: If valid, this option allows the pilot to enter a manual VNAV
altitude and offset for the selected waypoint. This menu level allows for
synchronizing the VNAV altitude to current altitude and for removing
the manual VNAV altitude and offset entries. These altitudes are
settable in increments of 100 feet and distances of 1 NM. Option valid
for any waypoint except:
a) Suppressed
waypoint
b) Skipped
waypoint;
c) A manual termination waypoint;
d) A waypoint that is part of an IFR or VFR approach;
e) A SAR pattern exit waypoint:
f) A parallel offset entry or exit waypoint; or
g) One of the following types of termination legs:
i) Dynamic
ii) Altitude
iii) DME
iv) Radial
or
v) Intercept
3)
HOLD
: If valid, this option allows the pilot to enter a manual holding
pattern at the selected waypoint. Option valid for any waypoint except:
a) Suppressed
waypoint;
b) Skipped
waypoint;
c) A manual termination waypoint;
d) A waypoint that is part of a missed approach procedure, including
the missed approach waypoint;
e) A waypoint that is part of a VFR approach;
f) A holding pattern waypoint;
g) A SAR pattern exit waypoint;
h) A waypoint that begins with a Departure Procedure;