Section 5 Menu Functions and Procedures
Rev A Apr 2019
IDU-450 EFIS Software Version 8.0H (Rotorcraft)
5-19
6) Either
press
SAVE (R3)
user
waypoint or press
(R4)
to
create RD001 as the Active
waypoint and begin navigation
guidance.
NOTE:
Pressing
EXIT (R1)
only exits menu
and does not save the new USER
WPT.
* Reference Waypoint:
The pilot is prompted to enter an identifier for the
reference waypoint on the second line. Use
to enter the reference
waypoint in the same manner as a waypoint is entered for a flight plan. If
there is a single result from the search, the pilot is advanced to the radial
entry box. If there is no result from the search, the pilot is re-prompted to
enter an identifier. If there are multiple results from the search, a selection
list with matching identifiers is displayed, and upon selection, the pilot is
advanced to the radial entry box.
INFO
menu appears at this level and
provides access to information for the highlighted result.
Radial Entry
: The third line is for pilot to specify a radial from the reference
waypoint in increments of degrees.
Distance Entry
: The fourth line allows the pilot to specify a distance from
the reference in increments of tenths of nautical miles.
5.7.14. Edit User Waypoint (MFD Only) (Step-By-Step)
1) Press
FPL (L1)
.
2) Scroll
to
CREATE-EDIT..
and
push to enter.
3) Scroll
to
EDIT USER WPT
and
push to enter.
4) Scroll
to desired waypoint to be
edited.