Chapter 2: Setting Up the Phone
Mounting the Phone
18
420HD IP Phone
Note:
If the LAN to which the phone is connected supports Power over Ethernet (PoE), no
AC adapter is required; the phone receives power from the Ethernet network.
Mounting the Phone
The phone can be mounted on a:
Desk
Wall
Desktop Mounting
This section shows how to place the phone on a desk or flat surface.
To mount the phone on a desk or flat surface:
1.
Off-hook the handset (if on-hook) and place the phone upside down, i.e., base-up,
on your desktop.
2.
On the phone's base, identify outer rails.
3.
On the phone's stand, identify outer notches.
4.
Invert the stand and align its outer notches with the base's outer rails.
5.
Insert the stand's outer notches into the base's outer rails and slide the notches
along the rails until the stand click-locks into the base.
6.
Revert the phone and stand it on the desktop.
Routing the Handset Cable
The phone features a groove for routing the handset cable as shown in the next Figure 4.
