Chapter 2: Setting Up the Phone
Device Description
16
420HD IP Phone
Rear View
The rear view of the phone is shown in the figure below and described in the Table 2.
F igure 2:
Rear View
Table 2: Rear View Description
#
Label
Description
Handset jack, i.e., RJ-9 port, to connect the handset.
RJ-45 port to connect to the Ethernet LAN cable for the LAN connection
(uplink - 10/100 Mbps). If you're using Power over Ethernet (PoE), power
to the phone is supplied from the Ethernet cable (draws power from either
a spare line or signal line).
RJ-45 port for connecting the phone to a PC (10/100 Mbps downlink).
12V DC power jack that connects to the AC power adapter.
Headset jack, i.e., RJ-9 port that connects to an external headset.
2
4
3
1
1
2
3
4
5
5
